Floorings: paints and coatings for floors
Painting a floor is not like painting a wall. Flooring is subject to abrasion, impact, chemicals, and capillary moisture, which means the system must be chosen for its resistance, not its color. Here you will find epoxy, polyurethane, acrylic paint, microcement, and technical finishes for garages, warehouses, terraces, or swimming pools.
Which system depending on the use
| System | Resistance | Weak point | Typical Use |
|---|---|---|---|
| 2-component Epoxy | Very high abrasion and chemical resistance | Yellows with sun exposure | Garages, warehouses, workshops, interiors |
| Polyurethane | High, with some elasticity | More expensive | Exterior, areas with expansion |
| Water-based Acrylic | Medium | Shorter lifespan | Light traffic, storage rooms, quick renovations |
| Microcement | High if well-sealed | Demanding application | Homes, commercial spaces, decorative finish |
Substrate preparation
For flooring, preparation is more important than the product. A good epoxy that is poorly prepared will last less than a well-applied acrylic.
- ✓ New concrete needs 28 days of curing before anything can be applied.
- ✓ Remove surface laitance by shot blasting, milling, or diamond grinding.
- ✓ Degrease thoroughly: engine oil penetrates and ruins adhesion.
- ✓ Seal cracks and joints before applying, never after.
- ✓ Bag test: stick plastic to the floor for 24 hours. If condensation appears, there is moisture and you need an epoxy barrier.
Working with two-component products
- 1 → Respect the mixing ratio by weight. "Eyeballing" it won't cure properly and will remain soft forever.
- 2 → Mix with an electric stirrer at low revolutions and scrape the bottom and sides of the bucket.
- 3 → Monitor the pot life of the mixture. Once mixed, the clock is ticking even if you don't apply it.
- 4 → Apply between 10 and 25 °C. It won't cure in the cold; in the heat, you'll run out of working time.
- 5 → Respect the curing time before allowing traffic: pedestrian in hours, vehicular usually requires several days.
-
-34%MonestirMonestir Mitrol Wet — Permanent Wet-Look Protector for Clay and Terracotta, Indoor and Outdoor
Monestir Mitrol Wet is Monestir's water-based sealing treatment that provides a permanent wet look effect on clay and terracotta —...
From 18.89 € 29.06 €18.89 €18.89 € 29.06 €In stock, ready for dispatch -
-89%MonestirMonestir Protecer — Pre-Grouted Protection for Terracotta, Clay, and Natural Stone
Monestir Protecer is Monestir's pre-installation treatment — applied to pieces before grouting, it prevents cement from penetrating and staining terracotta,...
From 13.72 € 17.16 €13.72 €13.72 € 132.42 €In stock, ready for dispatch -
-3%CEMHERMicroröck Two-Component Epoxy Microcement Cemher | 80 MPa, Waterproof, High Traffic · 5 and 10 kg Kits + Hardener
Microröck Two-Component Epoxy Microcement Cemher Microröck is Cemher's highest-performing microcement: a two-component epoxy system (ready-to-use aggregate + hardener) that is...
From 99.20 € 199.49 €197.56 €197.56 € 203.95 €In stock, ready for dispatch -
-35%MonestirMonestir Noble Liquid — Self-Shining Wax for Rustic, Terracotta, Marble, and Mosaic Floors
Monestir Noble Líquida is Monestir's self-shining wax for rustic floors — it protects and beautifies terracotta, aged marble, and hydraulic...
18.04 € 27.76 €18.04 €18.04 € 27.76 €In stock, ready for dispatch -
-21%FILAFila Longlife — Professional Self-Shining Wax for Indoor Terracotta and Natural Stone Floors
Fila Longlife is Fila Solutions' high-quality self-polishing wax — protection and immediate shine without the need for mechanical polishing for...
23.41 € 30.01 €23.41 €23.41 € 30.01 €In stock, ready for dispatch -
-16%FILAFila Matt — Professional Matt Finish Wax for Terracotta, Extruded Stoneware and Natural Stone
Fila Matt is Fila Solutions' professional matte finish wax — formulated to protect and enhance terracotta, extruded porcelain, and natural...
24.99 € 30.01 €24.99 €24.99 € 30.01 €In stock, ready for dispatch -
Sold out -20%StockpinturasBlatemclor Floors
Chlorinated rubber and/or acrylic resin-based paint for application on cement and asphalt. Excellent drying, adhesion, resistance to alkalinity and atmospheric...
From 16.03 € 20.04 €16.03 €16.03 € 20.04 € -
StockpinturasEpoxy 3D Thixol
Self-leveling epoxy resin. Epoxy Resin / 100% Solids Formulated for decorating floors with 3D epoxy floors, it allows choosing any...
From 33.24 €272.09 €272.09 €In stock, ready for dispatch -
StockpinturasTixol Pu Finish Varnish
Transparent protective varnish, excellent outdoor resistance, high scratch resistance, non-yellowing. Floors – Metals. Finishes: matte, satin, gloss and ultra matte.
From 29.89 €30.90 €30.90 €In stock, ready for dispatch -
-22%FILAFila Concrete Shield 5L — Printed Concrete, Cement and Prefabricated Concrete Protector and Beautifier
Fila Concrete Shield is Fila Solutions' eco-friendly, water-based treatment for protecting, consolidating, and enhancing cement, stamped concrete, and precast surfaces....
66.54 € 85.31 €66.54 €66.54 € 85.31 €In stock, ready for dispatch -
-21%FILAFila Stoneplus Matt 1L — Matt Toning Protector for Marble, Granite, Travertine and Countertops
Fila Stoneplus Matt is Fila Solutions' professional matte tone-enhancing protector — it enhances the natural color of stone, marble, granite,...
45.59 € 58.44 €45.59 €45.59 € 58.44 €In stock, ready for dispatch -
CEMHERMicrolevel Single-Component Microcement Cemher | Self-Leveling Trend, 48 MPa · Indoor Flooring in 10 and 20 kg
Microlevel One-Component Microcement Cemher Microlevel is Cemher's one-component microcement (cement + water) specifically designed for interior floors. Its formula has...
From 61.11 €107.75 €107.75 €In stock, ready for dispatch
