Skip to content

Sandpapers and abrasives: sheets, discs, rolls, and mesh

Sanding determines the final result more than the paint itself. Choosing the right grit, abrasive material, and backing saves time, sheet consumption, and reworks. Here you will find abrasives for wood, metal, putty, paint, and walls, in sheet, disc, roll, sponge, and mesh.

Which grit to use at each stage
Never skip more than one grit step. If you go directly from P80 to P240, the fine grit won't remove the scratches left by the coarse grit; it will only polish them, and they will remain visible under the varnish. The correct sequence is progressive, almost doubling the number each time.
Grit Phase Typical task
P40 – P80 Coarse sanding Removing old paint, leveling rough wood
P100 – P150 Preparation Smoothing before priming, reducing putty
P180 – P240 Finishing Sanding between coats, preparing for painting
P320 and above Refining Varnishes, lacquers, wet sanding
Abrasive type according to material
  • Aluminum oxide: the all-rounder. Wood, paint, metal. Brown or reddish color.
  • Silicon carbide: black, harder and more brittle. For wet sanding, varnish, stone, and metal.
  • Zirconia: bluish, very resistant. Aggressive coarse sanding on metal and hardwood.
  • Abrasive mesh: does not clog. Ideal for plasterboard, plaster, and putty, and allows dust to pass through to the vacuum.
  • Abrasive sponge: conforms to moldings and curved profiles.
Work better and spend less
  • 1 → Always sand wood in the direction of the grain. Cross-grain scratches appear when applying stain or varnish.
  • 2 → Do not press down. The abrasive cuts by itself; pressure only clogs it and burns the surface.
  • 3 → Use dust extraction or perforated discs. Dust trapped between the sandpaper and the workpiece multiplies sheet consumption.
  • 4 → For wet sanding, wet the workpiece and rinse the sheet frequently to wash away residue.
  • 5 → Clean thoroughly before painting. Any residual dust will show under the finish.
Related: electric sanders, putties, strippers, masks and protection, and polishes. Questions? WhatsApp +34 621 20 71 54.

27 products

You might like