
About the product
DESCRIPTION
Wood finishing product made of solvent-modified alkyd resins, with incorporated UV protectors.
PROPERTIES
Breathable, which allows it to regulate wood moisture; penetrating, does not form a film on the wood so it does not crack; highly durable outdoors due to the pigments it incorporates and UV protectors; and prevents harmful effects on wood indoors and outdoors. The colors in the range are intermixable.
APPLICATIONS
For the protection of all types of open-pore wood and especially as a finish over Xilatem Fondo both indoors and outdoors. We recommend Xilatem Satin Incoloro for wood protected from the sun.
TECHNICAL CHARACTERISTICS
Color: Colors according to sample. Adhesion: Excellent. Brushability: Excellent. Drying time: 5-10 hours. Recoating: 24-36 hours. Viscosity: 14 ± 5" at 25 ± 8ºC (ASTM D-1200).
Density: 0.90 ± 0.12 g / cc (UNE-EN-ISO 2811-1 and 2).
Yield: 8-14 m2/liter per coat. Flash point: 43 ± 5ºC Setaflash, closed cup. Stability in container: More than one year in original sealed container. Utensils: Clean with Solvent for Enamels, Cleaning Solvent or Universal Solvent. VOC: 2004/42/IIA(f)(700/700) Max. VOCs 600 g/Lt.
APPROVALS AND TESTS
Approvals:
-Stacking under pressure UNE-EN-ISO 4622.
-Resistance to cold-heat cycles UNE 48025.
-Lightfastness UNE-EN-ISO 11341.
-Resistance to biological attack, AIDIMA internal methods.
-Water permeability UNE-EN 927-5.
-Resistance to wet-dry cycles ASTM D-3459.
-Water vapor permeability UNE-EN 927-4.
-Artificial aging NFT 30049.
SURFACE PREPARATION
New wood: The wood to be treated must be clean, dry (moisture content less than 20%) and free of foreign matter or dust before applying Xilatem Satin. Varnished wood: If it has been varnished with open-pore Xilatem Satin, sand lightly, remove dust and proceed as with new wood. If it is varnished with closed-pore Universal Synthetic Gloss Varnish or similar, strip with DK2 and proceed as with new wood.
INSTRUCTIONS FOR USE
Stir the container well and apply undiluted with a brush along the wood grain, by immersion or spray gun. Insist on applying to the most absorbent areas. If, after 10-25 minutes of application, we pass a dry cloth or brush along the grain, we will obtain a more regular and matte finish.
RECOMMENDATIONS
After use, close the container, leaving as little air space as possible if it will be a while before using it again. Stir the contents of the container well until perfectly homogenized. Do not apply the product on surfaces exposed to strong sunlight.
PRESENTATION
Available in 750 ml and 4 liter sizes. Colors: Pine, Oak, Chestnut, Walnut, Teak, Sapele, Rosewood and Colorless.
STORAGE
Storage time: 1 year in its original sealed container, protected from the elements (covered and at a temperature between 5 and 35ºC).
SAFETY INFORMATION
It is essential to follow the instructions on the container label. For more information, consult the product safety data sheet.



















