
About the product
DESCRIPTION
A wood finishing product based on special water-based polymers, with incorporated UV protectors.
PROPERTIES
Breathable, allowing the wood's moisture to be regulated, penetrating, does not form a film on the wood (if not applied in excess), so it does not crack, highly durable outdoors due to the incorporated pigments and UV protectors; and prevents harmful effects on wood indoors and outdoors. The colors in the range are intermixable.
APPLICATIONS
For the protection of all types of open-pore wood and especially as a finish over Xilatem Aqua Primer both indoors and outdoors. Xilatem Aqua Satin Clear is not suitable for wood exposed to sun and rain.
TECHNICAL CHARACTERISTICS
Finish: Satin (if it does not form a layer on the wood).
Color: Colors according to sample. Adhesion: Excellent. Brushability: Excellent. Touch dry: 30 minutes. Recoat: 2-3 hours. Density: 1.00 ± 0.10 g/cc (UNE-EN-ISO 2811-1 and 2).
Coverage: 10-14 m2
/lt applied in two or more coats. Non-flammable. Shelf life: One year in original sealed container. Tools: Clean with water. VOC: 2004/42/IIA(f)(150/130) Max. VOCs 50 g/L.
SURFACE PREPARATION
New wood: The wood to be treated must be clean, dry (moisture content less than 20%) and free of foreign products or dust before applying Xilatem Aqua Satin. Varnished wood: If it has been varnished with Xilatem Aqua or solvent-based Xilatem, open-pore, sand the surface, remove dust, and proceed as with new wood. If it is closed-pore varnished with Universal Gloss Synthetic Varnish or similar, strip with DK2 and proceed as with new wood.
INSTRUCTIONS FOR USE
Shake the container well before use and apply undiluted, by brush, following the wood grain, by immersion, or by spray gun. Insist on applying to the most absorbent areas. If, after 5 minutes of application, a dry cloth or brush is passed along the grain, a more even finish will be obtained.
RECOMMENDATIONS
After use, close the container, ensuring little air space is left if it is not to be used again for some time. Stir the contents of the container thoroughly until perfectly homogenized. Do not apply the product on surfaces exposed to strong sunlight.
PRESENTATION
Available in sizes: 750 ml and 2.5 L.
Colors: Clear, Pine, Pitch Pine, Mahogany, Oak, Chestnut, Walnut, Teak, and Sapele.
STORAGE
Storage time: One year in its original sealed container and protected from the elements (covered and at a temperature between 5 and 35ºC).
SAFETY INFORMATION
It is essential to follow the instructions on the container label. For more information, consult the product safety data sheet.



















