
About the product
Synthetic primer for preparing porous wood and plaster surfaces, preventing absorption into finishes. Excellent whiteness, coverage, and ease of application.
PROPERTIES
Quick drying, easy sanding, ease of application, excellent sealing, whiteness, and coverage, allowing for the highest quality finishes.
APPLICATIONS
For sealing porosity and evening out wood and plaster surfaces when high-quality finishes are desired with synthetic enamels or water-based acrylics.
TECHNICAL CHARACTERISTICS
Nature: Alkyd. Color: White (can be colored with our universal tints).
Finish: Matte. Adhesion: Excellent. Brushability: Excellent. Drying time: 2 ± 1 hour at 25 ± 8ºC.
Sandable: 8-12 hours. Recoatable: 18-24 hours. Viscosity: 95 + 15 UK (Krebs Units) at 25 ± 10ºC (UNE 48.076).
Density: 1.53 ± 0.10 gr/cc (UNE-EN-ISO 2811-1 and 2).
Fineness: 6.5 ± 1 H.G. (Hegman Grades) (UNE-EN-ISO 1524).
Coverage: 8-10 m²/L per coat. Flash point: 38 ± 6ºC Setaflash (Closed Cup).
Container stability: More than one year in original sealed container. Tools: Clean with Enamel Thinner, Cleaning Thinner, or Universal Thinner. VOC: 2004/42/IIA (g)(450/350) Max. VOC 349 g/L.
SURFACE PREPARATION
New surfaces:
Plaster: Once dry, clean, and smoothed, apply the Sealer directly. If the finish is to be colored, tint the Sealer with our Universal Tints, and in most cases, only one coat of the final product will be needed. After 12-18 hours, fill defects with synthetic fillers, letting them dry for 8-12 hours. Then re-apply the same Sealer, allowing it to dry thoroughly for 18-24 hours before applying the finish paint. Wood: Apply directly following the previous process (sanding must be done well).
Painted surfaces:
Paints in good condition: Wash, sand, and apply the finish paint directly. Paints in poor condition: Remove them completely and proceed as with new surfaces.
HOW TO USE
Apply with a brush, roller, or spray gun (preferably with a brush or roller).
Product is ready to use. Do not apply on overheated surfaces, and apply in thin coats.
RECOMMENDATIONS
After use, close the container, ensuring minimal air space if it will not be used again soon. Stir the contents until the product is homogeneous.
PACKAGING
Available in 0.250 liter, 0.750 liter, and 4 liter containers.
STORAGE
Recommended maximum storage time: 12 months in its original sealed container, protected from the elements (under cover and at temperatures between 5 and 35ºC).
SAFETY INFORMATION
It is essential to follow the instructions on the container label. For more information, consult the product's safety data sheet.



















