
About the product
DESCRIPTION
Water-based primer for preparing porous wood and plaster surfaces. Seals surfaces, preventing uneven absorption of finishes.
PROPERTIES
Quick-drying, easy to sand, easy to apply, excellent sealing, whiteness and coverage, allowing for the highest quality finishes.
APPLICATIONS
For sealing porosity and unifying wood and plaster surfaces when high-quality finishes are desired with synthetic enamels or water-based acrylics.
TECHNICAL CHARACTERISTICS
Nature: Alkyd. Color: White (can be colored with our Multi-purpose Colorants). Finish: Matte. Adhesion: Excellent. Brushability: Excellent. Drying: 2-4 hours. Sandable: 8-12 hours. Recoating: 18-24 hours. Viscosity: 90 ± 15 UK (Krebs Units) at 25 ± 10ºC (UNE 48.076).
Density: 1.30 ± 0.10 gr/cc (UNE-EN-ISO 2811-1 and 2).
Coverage: 8-10 m2
/lt per coat. Container stability: More than one year in original sealed container. Tools: Clean with water. VOC: 2004/42/IIA (g)(50/30) Max. VOCs 15 g/Lt.
SURFACE PREPARATION
New surfaces:.
Plaster: Once dry, clean, and smoothed, apply the Sealer directly. If the finish is to be colored, tint the Sealer with our Multi-purpose Colorants, and in most cases, only one coat of the final product will be needed. After 12-18 hours, patch defects with synthetic fillers, allowing them to dry for 8-12 hours. Then re-coat with the same Sealer, letting it dry thoroughly for 18-24 hours before applying the finish paint. Wood: Apply directly following the above process (sanding must be done well).
Painted surfaces:.
Paints in good condition: Wash, sand, and paint directly. If unsure, or if poorly adhered, remove it and proceed as with an unpainted surface. Paints in poor condition: Remove them completely and proceed as with new surfaces.
HOW TO USE
Apply with a brush, roller, or spray gun (preferably with a brush or roller).
Do not apply on overheated surfaces, and apply in thin coats. Dilution 10-15%.
RECOMMENDATIONS
After use, close the container, leaving as little air space as possible if it will be a while before reuse. Stir the contents until the product is homogeneous. Do not apply in rainy weather. Do not apply on surfaces overheated by the sun.
PRESENTATION
In 750 ml and 4 liter containers.
STORAGE
Maximum recommended storage time: 12 months in its original sealed container, protected from the elements (covered and at a temperature between 5 and 35ºC).
SAFETY INFORMATION
It is essential to follow the instructions on the container label. For more information, consult the product's safety data sheet.



















