
About the product
Top quality matte water-based coating for facades and exteriors in general, based on silicone resins (polysiloxanes) and acrylics with pigments and extenders of maximum weather resistance. With anti-mold effect (on the paint).
APPLICATIONS
For the decoration and protection of facades, and exteriors in general, on concrete, cement, brick, fiber cement, etc. When a high-quality paint is desired or required, which allows good water vapor breathability from the wall. Its application is ideal for new mineral masonry surfaces, as well as the renovation and repainting of old silicone (polysiloxane) or silicate paints.
CHARACTERISTICS
APPEARANCE smooth and matte quality
FINENESS (UNE-EN-ISO 1524) 6 ± 1 HG (Hegman grades).
VISCOSITY (UNE 48.076) 100 ± 15 u.k.(Krebs units) at 25 ± 10ºC.
DENSITY (UNE-EN-ISO 2811 1) 1.48 ± 0.05 Kg / liter (white).
SOLIDS BY VOLUME 38±2% white. YIELD 9 -12 m2 / liter and coat
TOUCH DRY 30 - 60 minutes
RECOATING 4 - 8 hours
COLOR White and colors according to sample card. DILUENT water
C.O.V.(white and colors) 2004/42/II A(c) (75/40). Maximum VOC content 40 g / l.
SURFACE PREPARATION
New unpainted surfaces.
For cement mortars and concrete, wait 4 weeks until complete setting, clean possible efflorescence and form release agents, remove dust and loose parts, cover cracks, etc.
Already painted surfaces.
If old paints are in poor condition or poorly adhered, they should be completely removed with a pressure water jet and allowed to dry. In general, the surface must have porosity (do not use on crystalline surfaces, i.e., completely closed pores).
INSTRUCTIONS FOR USE
Apply a first coat thinned with 20-30% potable water and a second coat with approximately 10%. It is applied with a brush, roller or spray gun. Dilution: brush and roller 10 - 15%, spray gun 15 - 25% potable water. If the surface has adhesion problems, prime beforehand with our Acrylic Sealer or Solvent Sealer.
RECOMMENDATIONS
Do not paint in rainy weather or with temperatures below 5ºC or strong winds. Do not apply the product on surfaces exposed to strong sunlight. Stir the contents of the container until perfectly homogeneous.
PRESENTATION
In 15-liter containers. Colors: White and selected colors (exterior chart 108 colors).
STORAGE
Storage time more than one year in its original container, well closed and protected from the elements (covered and at a temperature between 5 and 35ºC).
SAFETY INFORMATION
If applied by spray gun, it is advisable to wear a mask.
Keep the product out of the reach of children. In case of contact with eyes, wash with plenty of clean water. For more information, consult the product safety data sheet.



















