
About the product
Titan Pro I5 is Titan Pro's acrylic anti-leak coating — an elastic and walkable waterproofing solution for terraces, flat roofs, and sloped roofs with pedestrian traffic. It creates a continuous elastic membrane that seals existing cracks and fissures, with anti-mold, anti-mildew, and UV resistance. The perfect solution for domestic terraces and communities that need waterproofing without major construction work. Available in 1 L, 4 L, and 15 L, in white and gray.
What surfaces and situations is I5 ideal for?
- ✓ Flat terraces with deteriorated waterproofing that need renovation without major construction work
- ✓ Flat roofs of residential communities — periodic maintenance
- ✓ Fiber cement roofs (uralita) with leaks — I5 seals and protects
- ✓ Tile or slate roofs — for waterproofing without changing the roof
- ✓ Moderate pedestrian traffic — the walkable formulation withstands foot traffic
Why choose Titan Pro I5
- ✓Elastic — seals small fissures and cracks — the elastic membrane covers micro-fissures in the substrate without breaking; continuous protection even on substrates with minor movements
- ✓Walkable — suitable for trafficked terraces — the dry film withstands moderate pedestrian traffic; can be used as a finish on terraces without additional protection
- ✓No major construction work required — applied with a roller over the existing roof — does not require removing previous waterproofing in most cases; direct application with a long-pile roller
- ✓Anti-mold, anti-mildew, and UV resistant — active protection against biological and solar degradation, which is the main cause of waterproofing failure
How to apply I5
- Clean the surface — remove dust, moss, algae, and loose particles. Treat with fungicide if there is biological contamination.
- Apply the first coat with a long-pile roller, diluting 5-10% with water. Wait for complete drying.
- Apply the second coat undiluted, in a direction perpendicular to the first. In areas with fissures or joints, reinforce with mesh tape before the second coat.
- Service time: wait a minimum of 48-72 hours before walking on the surface.
Technical specifications
| Base | Elastic acrylic water-based |
| Use | Terraces · Flat roofs · Sloped roofs |
| Walkable | Yes — pedestrian traffic |
| Colors | White · Gray |
| Formats | 1 L · 4 L · 15 L |
1) Sube una foto
La foto se procesa en tu navegador. No se sube a ningún servidor.
2) Toca la pared para seleccionarla
22
Tip: si selecciona demasiado, baja tolerancia. Si selecciona poco, súbela y toca dentro de la pared.
Usa “Añadir zona” para completar y “Quitar zona” para corregir.
3) Elige el color
Ejemplo: #D8C8A8
70
Nota: resultado orientativo. Puede variar según pantalla, luz y superficie.
Sube una foto para empezar.
Preview the color on your wall
Upload a photo, tap on the wall, and apply a HEX color. Approximate result.
- Sube una foto.
- Toca la pared para seleccionarla (añadir / quitar).
- Elige el color y ajusta la intensidad.
Estado: esperando foto.



















