
About the product
Titan Pro P10 is the entry-level styrene acrylic paint in the Titan Pro range — formulated for economical and efficient painting of large interior surfaces: industrial warehouses, residential communities, commercial premises, and construction sites where performance and cost per m² are a priority. Low odor, non-drip, good whiteness, and a matte finish without glare. Can be tinted with the TitanColor system. Available in a single 15 L format.
Which projects and surfaces is it ideal for?
- ✓ Industrial warehouses, storage facilities, parking lots, and large surface areas
- ✓ Residential communities — landings, hallways, and common areas
- ✓ Commercial premises and offices undergoing renovation
- ✓ Projects where cost per m² is a determining factor and the substrate is in good condition
- ✓ Plaster, gypsum, cement, concrete, and interior masonry surfaces
Why choose Titan Pro P10?
- ✓Low odor — safe for inhabited interiors — mild odor formulation allows work in occupied homes and premises without the need to evacuate the space; fast drying to minimize inconvenience
- ✓Non-drip — clean application with roller — the product's rheology is adjusted to prevent dripping or splashing during application; less time for preparation and clean-up on the job site
- ✓Breathable — compatible with damp substrates — allows water vapor to pass through without the film peeling off; ideal for walls that may have residual capillary moisture
- ✓TitanColor tinting compatible — custom colors — the white base can be tinted to any color from the TitanColor system at your preferred point of sale
Technical specifications
| Base | Water-based styrene acrylic |
| Finish | Matte |
| Theoretical coverage | 6–8 m²/L |
| Use | Interior |
| Application | Brush · Roller · Spray gun |
| Fire certification | B-s1,d0 (UNE EN 13501-1) |
| Format | 15 L |
Frequently Asked Questions
1) Sube una foto
La foto se procesa en tu navegador. No se sube a ningún servidor.
2) Toca la pared para seleccionarla
22
Tip: si selecciona demasiado, baja tolerancia. Si selecciona poco, súbela y toca dentro de la pared.
Usa “Añadir zona” para completar y “Quitar zona” para corregir.
3) Elige el color
Ejemplo: #D8C8A8
70
Nota: resultado orientativo. Puede variar según pantalla, luz y superficie.
Sube una foto para empezar.
Preview the color on your wall
Upload a photo, tap on the wall, and apply a HEX color. Approximate result.
- Sube una foto.
- Toca la pared para seleccionarla (añadir / quitar).
- Elige el color y ajusta la intensidad.
Estado: esperando foto.



















