
About the product
Oxi...No Rust Converter
Oxi...No is a liquid rust converter designed to chemically react with iron oxide and convert it into a stable protective layer. Its formulation based on copper and other elements allows it to neutralize corrosion and prepare the metallic surface for subsequent treatments with red lead paint or other paint.
This product acts by deeply penetrating the pores of the rust, transforming it into a protective blued substrate that inhibits corrosion. It is non-corrosive, does not release toxic fumes, and its odor is practically imperceptible, which facilitates its use in multiple industrial and maintenance applications.
🔸 What is it?
Oxi...No is a patented chemical solution that reacts with iron oxide (Fe II and Fe III), transforming it into a neutral and stabilized protective layer. Thanks to its high penetration capacity, the product acts directly on the rust structure, hardening it and creating a suitable base for paint systems or anti-corrosion protection.
🧪 Advantages / Properties
- Transforms iron oxide into a stable protective layer
- High penetrating power into rust pores
- Does not contain film-forming elements that generate bubbles
- Neutralizes and hardens existing rust
- Non-corrosive and does not release toxic fumes
- Practically imperceptible odor
- Allows subsequent electric welding without altering the treatment
- Forms protective layers of up to 50 microns on young rust
- Resistance to service temperatures of up to 400 ºC once dry
- Applicable even at temperatures down to –8 ºC
🛠 Applications / Recommended uses
- Anti-corrosion treatment of rusted metal surfaces
- Iron preparation before applying red lead paint or other paint
- Industrial maintenance of metal structures
- Repair and protection of machinery or metal parts
- Treatment of metal surfaces in industrial environments
Before applying the product, the surface must be clean of grease, oil, or contaminants. For this, it is recommended to clean with solvents or with water and degreasing detergents. In marine environments, it is recommended to rinse beforehand with fresh water to remove salt residue.
📊 Technical specifications
| Product type | Chemical rust converter |
| Main composition | Based on copper and other elements (patent no. 519,161) |
| Yield | 20 – 30 m² per liter depending on the degree of oxidation |
| Drying time | Approx. 3 hours at 25 ºC |
| Low-temperature application | Down to -8 ºC without freezing or chemical alteration |
| Thermal resistance | Up to 400 ºC once dry |
| Application | Brush, roller, or airless spray gun |
| Preparation | Product ready to use, do not dilute |
The product can even be applied to damp surfaces, although the drying time may increase. If the relative humidity exceeds 85%, drying may be extended by approximately five additional hours.



















