
About the product
JUNO Junoral B10 Plastic Paint (Interior)
JUNO Junoral B10 Plastic Paint is a paint based on vinyl copolymers that is easy to apply and has low spatter, with very good washability and scrub resistance. It incorporates anti-mold preservatives to prevent the appearance of microorganisms and achieve durable, high-quality finishes indoors.
🔸 What is it indicated for?
Decoration and protection of plaster, cement, or stone surfaces indoors, when a high-level semi-matte finish is required.
✨ Key advantages
- Very decorative semi-matte finish.
- High opacity and great coverage.
- Excellent adhesion to the substrate.
- Anti-mold (with preservatives).
- Impermeable to wash water and breathable to vapor.
- High wet scrub resistance. Washable.
- No spatter and fast drying.
- Does not contribute to fire.
🧪 Certifications
- Fire reaction: B-s1, d0 (UNE 13501-2)
📊 Technical characteristics
| Finish | Semi-matte |
| Color | White |
| Viscosity | Min. 90 P (S/FR1007) |
| Density | 1.48 ± 0.05 g/cc (S/FR1001) |
| Touch dry | ≈ 45 min |
| Recoating | Min. 6 h · Max. unlimited |
| Thinner | Water (max. 10%) |
| Coverage | 12–14 m²/L per coat* |
| Tinting | Juno Universal Colorant (max. 3%) |
| Volume solids | 38 ± 2 % (theoretical, white) |
| Flash point | Non-flammable |
| VOC content | Max. 30 g/L |
*Coverage may vary depending on the roughness and absorption of the substrate.
🖌️ How to use
- Surface preparation: the surface must be clean, dry, and firm, free of dust, grease, or poorly adhered parts.
- Application: brush, roller, or spray gun. Usually 2 coats. Dilute the first coat up to 10% with water if necessary.
- Drying/recoating: touch dry ≈45 min; recoating after 6 h.
- Cleaning tools: water.
✅ Recommendations
- Avoid applying in high relative humidity or drafts that accelerate drying.
- On highly absorbent or powdery backgrounds, consolidate beforehand with an appropriate primer from the JUNO range.
- Respect drying times between coats to achieve maximum washability and uniformity.
1) Sube una foto
La foto se procesa en tu navegador. No se sube a ningún servidor.
2) Toca la pared para seleccionarla
22
Tip: si selecciona demasiado, baja tolerancia. Si selecciona poco, súbela y toca dentro de la pared.
Usa “Añadir zona” para completar y “Quitar zona” para corregir.
3) Elige el color
Ejemplo: #D8C8A8
70
Nota: resultado orientativo. Puede variar según pantalla, luz y superficie.
Sube una foto para empezar.
Preview the color on your wall
Upload a photo, tap on the wall, and apply a HEX color. Approximate result.
- Sube una foto.
- Toca la pared para seleccionarla (añadir / quitar).
- Elige el color y ajusta la intensidad.
Estado: esperando foto.



















