
About the product
DESCRIPTION
Multi-purpose primer (universal use) for preparing difficult-to-adhere surfaces before painting: galvanized iron, aluminum, copper, zinc, PVC, etc. It can be repainted with synthetic enamels, water-based enamels, polyurethanes, epoxy, chlorinated rubbers, and water-based paints.
PROPERTIES
Strong adhesion on difficult substrates, high penetration power, fast drying, easy application and repainting.
APPLICATIONS
This product is designed to be applied on galvanized iron, aluminum, copper, zinc, PVC, iron, steel, wood, etc., both indoors and outdoors, to ensure the adhesion of the paint or finish enamel.
TECHNICAL CHARACTERISTICS
Finish: Smooth matte. Colors: White and grey. Adhesion: Good. Drying time: 30 ± 10 minutes at 25 ± 8ºC.
Recoating time: 2-6 hours (depending on product type).
Viscosity: 200 ± 40" F-4 (Ford cup No. 4) at 25 ± 8ºC (ASTM D-1200).
Density: 1.42 ± 0.10 g/cc (UNE-EN-ISO 2811-1 and 2).
Fineness: 7 ± 1 H.G. (Hegman degrees) (UNE-EN-ISO 1524).
Yield: 8-11 m2
/Lt per coat. Shelf life: Minimum one year in original sealed container. Tools: Clean with Multi-purpose Primer Thinner or Universal Thinner. VOC: 2004/42/II A(i)(600/500) Max. VOCs 450 g/Lt.
SURFACE PREPARATION
Clean and degrease the surface thoroughly so that it is dry and free of dust, grease, and waxes. If the surface has rust spots, remove them beforehand. On aluminum, copper, zinc, and galvanized surfaces, lightly sand the surface.
INSTRUCTIONS FOR USE
Dilute to application viscosity with our Multi-purpose Primer Thinner:
Brush and roller: 5-10%. Spray gun: 10%.
Repaint the primer with our solvent-based and water-based enamels and paints.
RECOMMENDATIONS
Stir the contents of the container until the product is homogenized. After 2 hours, or even earlier, it can be repainted with water-based paints, water-based enamels, and synthetic enamels. However, for chlorinated rubbers, epoxies, and polyurethanes that contain very aggressive solvents, it is necessary to wait up to 6 hours before recoating. When repainting the Red Multi-purpose Primer with chlorinated rubber, epoxy, or polyurethanes that contain very aggressive solvents, we recommend that the recoating application be done with a spray gun.
PRESENTATION
In 250 ml, 750 ml, and 4 Liter containers. Colors: White and grey.
STORAGE
Maximum recommended storage time: 12 months in its original sealed container, protected from the elements (under cover and at a temperature between 5 and 35ºC).



















