
About the product
Ferroluz 750ml Water Repellent
Invisible waterproofing and water repellent for exposed brickwork and natural stone facades, water-based. Code: 1031
Description
A water-based solution with transparent silicones that allows for impregnation of the treated surface to create a water-repellent protective layer.
Properties
- High penetration into the substrate
- Fast water-repellent efficacy
- Reduces dirt absorption
- Prevents soluble salt efflorescence while allowing facades to breathe.
- Water vapor permeable.
- and protects the appearance of the substrate's base without altering its color or appearance.
Application surfaces
Exterior and interior. Ideal for waterproofing natural stone facades, exposed bricks, concrete, cement mortars, bricks, plaster, and fiber cement. It does not alter their natural appearance but provides water repellency.
Technical characteristics
Color:
Specific gravity:
Touch dry:
Recoating:
Application:
Dilution and cleaning
Coverage:
Colorless, transparent 0.92 k/l +- 0.05k/l 1 hour at 20ºC.
Non-recoatable product
If two coats of the same product are applied to saturate the surface, apply the second coat before the first coat is completely dry. Brush, Roller, Spray gun. In water. The product does not need dilution 3-5 m2/l depending on the substrate
Instructions for use
New Surfaces:
Cement mortars:
If the substrate is new, wait a minimum of 30 days until it is fully cured. Ensure there are no traces of moisture. Clean the substrate of efflorescence and other foreign products and impurities. Use abrasive blasting if necessary. Fill defects with putties and/or fillers. Dry completely to avoid residual moisture.
Clean the surface with appropriate products and dry thoroughly. It is very important to avoid moisture. Exposed brick, natural stone and similar:
Ensure the surface is completely dry, without any traces of moisture. Clean the substrate thoroughly, removing all types of impurities and residues. Fill defects with putties and/or fillers. Dry completely to avoid residual moisture. Clean the surface with appropriate products and dry thoroughly. It is very important to avoid moisture. Restoration and maintenance:
Remove old paint residues if present. Clean the substrate thoroughly, removing all types of impurities and residues. Proceed as if they were new surfaces.
Observations
If the substrate shows mold or mildew contamination, clean and sanitize thoroughly. Ensure the surface is completely dry, without any traces of moisture. Avoid direct exposure of the container to the sun. Apply at temperatures between 8 and 35ºC.
Store the product in cool and dry places. Storage time: 6 months, from manufacture and packaging, unopened, kept in a closed place and at temperatures between 10 and 30ºC.
For other specific situations not covered in this sheet, consult our Technical Sales Department.



















