
About the product
Hempel’s Thinner 08450
(Epoxy)
For grades: 35651, 45182, 45550, 17634.
Note: HEMPEL'S THINNER 08450 is for professional use only. Hempel paint is produced and supplied in such a way that thinning is usually not necessary as the paint is supplied ready to use. However, in cases where it is to be applied in a very thin coat (e.g. as a sealer) or if the paint has become too thick, for example, in cold water, the HEMPEL THINNER indicated in the technical data sheet may be added to obtain a suitable consistency for application. As a general rule, thinning should be kept to a minimum as the paint quality would decrease if too much thinner is applied. However, if the application is to be carried out at high temperatures (air and/or steel), thinning may exceptionally exceed the limits mentioned in the technical data sheets and be necessary to prevent poor film formation. HEMPEL'S THINNER is designed to offer the best results in terms of brushability, spray properties, etc. In some ordinary cases, solvents can be substituted. As these products are beyond our control, we disclaim any responsibility for the results. In each case, the respective technical data sheet and - when available - the APPLICATION INSTRUCTIONS can be consulted. Regarding the use of THINNERS for tool cleaning, see REMARKS.
- General purpose solvent for Hempadur.
- Special solvent for epoxy products.
- Tools can be cleaned with the thinner used for the product.
Note: HEMPEL'S THINNER 08450 is for professional use only. Hempel paint is produced and supplied in such a way that thinning is usually not necessary as the paint is supplied ready to use. However, in cases where it is to be applied in a very thin coat (e.g. as a sealer) or if the paint has become too thick, for example, in cold water, the HEMPEL THINNER indicated in the technical data sheet may be added to obtain a suitable consistency for application. As a general rule, thinning should be kept to a minimum as the paint quality would decrease if too much thinner is applied. However, if the application is to be carried out at high temperatures (air and/or steel), thinning may exceptionally exceed the limits mentioned in the technical data sheets and be necessary to prevent poor film formation. HEMPEL'S THINNER is designed to offer the best results in terms of brushability, spray properties, etc. In some ordinary cases, solvents can be substituted. As these products are beyond our control, we disclaim any responsibility for the results. In each case, the respective technical data sheet and - when available - the APPLICATION INSTRUCTIONS can be consulted. Regarding the use of THINNERS for tool cleaning, see REMARKS.



















