
About the product
PROPERTIES
Excellent adhesion, ease of application and possibility of strong colors.
APPLICATIONS
For interior decoration on plaster, cement, etc., in public buildings, hotels, offices, shops, boutiques, chalets, luxury homes and any other place where a luxurious finish and exquisite taste is required. Especially with strong colors and large surfaces (trowel application).
TECHNICAL CHARACTERISTICS
Appearance: shiny marble after polishing. Washability: gently washable with sponge. Adhesion: excellent. Density: 1.61 ± 0.10 gr / cc (UNE-EN-ISO 2811-1).
Viscosity: 105 ± 15 UK (Krebs units) at 25 ± 10ºC and 10% water (UNE 48-076).
Fineness: 6 ± 1 H.G. (Hegman grades) (UNE-EN-ISO 1524).
Coverage: good. Yield: 1.5-2 m² / ltr. Drying to the touch: 60 ± 15 minutes. Sanding: sandable after 24 hours. Interval between coats: 24 hours. Colors: White and colors according to sample. Tools: clean with water. Preservation: more than one year in its original closed container. Non-flammable. C.O.V.: 2004/42/II (A/l)(300/200)Max. VOCs: 23 G/L.
SURFACE PREPARATION
New: remove loose parts and dust, cover cracks, etc. Painted: - with distemper or lime, remove it previously. With paint, remove the parts in poor condition.
HOW TO USE
On clean, dry and consistent surfaces, apply a first coat of smooth sea coating diluted with approximately 30% water. On the background thus prepared and after at least 4 hours, apply with a stainless steel trowel the Palacio Venetian Stucco in one or more coats until uniform color and thickness are obtained. (If it is necessary to sand, wait 24 hours and sand with fine sandpaper from nº 300 and remove the dust).
Finally, with the stainless steel trowel, apply a very thin layer of Palacio Venetian stucco, uniformly spacing each trowel stroke and covering all spaces. Before 30 minutes, proceed to smoothing and polishing with the trowel by pressing lightly. As an alternative to polishing, the Palacio Venetian Stucco can be given shine by treating it after 24 hours of having been applied, with paste wax of the self-polishing emulsion type.
RECOMMENDATIONS
Do not apply in rainy weather or at temperatures below 5ºC.
Stir the contents of the container before application. Note: with this technical information we only try to guide and advise according to our criteria and extensive experience, not being able to be held responsible for the consequences of the use of these products, as the conditions and circumstances of their application are beyond our control.
PRESENTATION
In 750 ml, 4 and 10 liter containers.
STORAGE
Storage time more than one year in its original closed container and protected from the weather (under cover and at a temperature between 5 and 35ºC).
SECURITY INFORMATION
It is essential to follow the instructions on the container label. For more information, consult the product safety data sheet.



















