
About the product
High-quality glossy synthetic enamel for interior and exterior use, formulated with the most advanced technology to achieve high performance.
PROPERTIES
Good whiteness (white), coverage, gloss, hardness, yield, brushability, and leveling, as well as good resistance to impacts, chafing, cleaning products, and antioxidant protection with excellent drying.
APPLICATIONS
For painting all types of properly prepared wood, masonry, and iron surfaces indoors and outdoors. Due to its high outdoor resistance, we recommend it for steel protection (as a finish).
TECHNICAL CHARACTERISTICS
Colors: White, black, and colors according to chart. Finish: Glossy. Leveling: Excellent. Adhesion: Excellent. Brushability: High. Drying: 2.5 ± 1.5 hours at 25 ± 8ºC depending on color. Recoating: 18 - 24 hours. Viscosity: 150 ± 50" F-4 (Ford cup nº 4) at 25 ± 8 ºC depending on color (ASTM D-1200).
Density: 1.15 ± 0.25 g/cc depending on color (UNE-EN-ISO 2811-1 and 2).
Yield: 750 ml for 8-10 m2
.
Film thickness: 70-90 wet microns (30-45 dry microns approx.).
Hardness: Good. Stability in container: More than one year in original sealed container. Tools: Clean with Enamel Thinner, Cleaning Thinner, or Universal Thinner. C.O.V; 2004/42/II (A/i) (600/500) Max. VOCs = 499 G/L.
SURFACE PREPARATION
New:
- Iron: Remove rust and degrease the surface, prime with Antioxidant Red Lead or with an Antioxidant Primer. After 24 hours, proceed to paint with Pintaluz.
- Galvanized iron, aluminum, and zinc: Clean and degrease the surface, apply Multipurpose Primer or Blatemprim Water-based Multi-adhesive Primer and proceed to paint with Pintaluz.
- Wood or plaster: Apply Synthetic Sealer, sand and clean dust;
and proceed to paint with Pintaluz. Painted:
- If in good condition, lightly sand and clean with Enamel Thinner before applying Pintaluz.
- If in poor condition, remove the paint, prime and paint with Pintaluz as if it were new.
HOW TO USE
Dilute with our Enamel Thinner to the appropriate viscosity. Apply with brush, roller, and spray gun. Always apply in thin coats according to the technical characteristics. Apply at least 2 coats, respecting recoating times.
RECOMMENDATIONS
Stir the contents to homogenize the product. After use, cover the container, trying to leave little air space, if it is not to be used again for a while.
PRESENTATION
In containers of: 750 ml and 4 liters. Colors: White, black, and 15 colors according to chart.



















