
About the product
PROPERTIES
High hiding power, yield, and hardness, easy to apply, quick-drying, and good leveling, resistant to impacts, abrasions, and cleaning products with a silky matte finish. Complies with VOC 2010.
APPLICATIONS
For painting all kinds of properly prepared wood, masonry, and iron surfaces indoors and outdoors.
TECHNICAL CHARACTERISTICS
Finish: Matte White and Matte Black. Leveling: Good. Adhesion: Excellent. Brushability: Excellent. Drying:
-White: 2h30' ± 1h at 25 ± 8ºC.
-Black: 3h30'± 1h at 25 ± 8ºC.
Recoat time: 18 - 24 hours. Viscosity: 160 ± 50" F-4 (Ford Cup No. 4) at 25 ± 8ºC (ASTM D-1200).
Density:
-White: 1.575 ± 0.10 g / cc (UNE-EN-ISO 2811-1 and 2).
-Black: 1.40 ± 0.10 g / cc (UNE-EN-ISO 2811-1 and 2).
Fineness: 7.5 ± 1 HG (Hegman Grades) (UNE-EN-ISO 1524).
Yield: 12-15 m2/Lt per coat. Hardness: Excellent. Maximum VOC content: 298 g/L.
Shelf stability: More than one year in the original sealed container. Tools: Clean with Enamel Thinner, Cleaning Thinner, or Universal Thinner. VOC: 2004/42/IIA (d) (400/300) Max. VOCs 299 g/l.
SURFACE PREPARATION
New surfaces:
- If made of plaster or wood, apply a primer coat of Synthetic Sealer and sand the surface.
- If the surface is iron, first apply a coat of Blatprimer Anti-rust. Painted surfaces:
- If the paint is in poor condition, remove it, fill defects, and proceed as for new surfaces.
- If the paint is in good condition, wash, sand the surface, and apply Blatemlux Matte.
INSTRUCTIONS FOR USE
Apply with a brush, roller, or spray gun. Product ready to use. Do not apply on surfaces overheated by direct sunlight. Proper prior sanding facilitates a good enamel finish. Always apply in thin coats, spreading as much as possible, to avoid prolonging drying time, wrinkling, dirt, etc. Apply the second coat respecting the recoating times (24 h.).
In this matte product, the initial sheen may appear high, but it will diminish over time.
RECOMMENDATIONS
After use, close the container, ensuring minimal air space if it will not be used again soon. Stir the contents to homogenize the product.
PRESENTATION
In 250 ml, 750 ml, and 4-liter containers. Colors: White.
STORAGE
Maximum recommended storage time: 12 months in its original, tightly sealed container, protected from the elements (indoors at a temperature between 5 and 35ºC).
SAFETY INFORMATION
It is essential to follow the instructions on the container label. For more information, consult the product's safety data sheet.



















