
About the product
PROPERTIES
Excellent whiteness and resistance to yellowing of the white color, coverage, gloss, performance, brushability, and leveling, as well as good drying and high resistance to impacts, scuffs, and cleaning products.
APPLICATIONS
For painting all types of properly prepared wood, masonry, and iron surfaces indoors and outdoors. Due to its excellent outdoor resistance, we especially recommend it for steel protection (as a finish).
TECHNICAL CHARACTERISTICS
Finish: Gloss white and colors according to sample card. Leveling: Excellent. Adhesion: Excellent. Brushability: Excellent. Drying: 4 ± 2h at 25±8ºC depending on color. Recoating: 18-24 hours. Viscosity: 170 ± 50" F-4 (Ford cup no. 4) at 25º± 8ºC depending on color (ASTM D-1200).
Density: 1.20 ± 0.30 gr/cc depending on color (UNE-EN-ISO 2811-1 and 2).
Fineness: 7.5 ± 1 HG (Hegman degrees) (UNE-EN-ISO 1524).
Coverage: 12-15 m²/Lt per coat. Film thickness: 65-85 wet microns (30-40 dry microns approx.).
Hardness: Good. Pot stability: More than one year in original sealed container. Tools: Clean with Enamel Thinner, Cleaning Thinner, or Universal Thinner. VOC: 2004/42/IIA (d) (400/300) Max. COVS 299 g/l.
APPROVALS AND TESTS
Blatprimer Antioxidant + Blatemlux system complies with UNE-EN-ISO 12944-6:1999 (Index 01) "Protection of steel structures against corrosion by protective paint systems." Category C3 medium; according to AIMME report no. S13-00353 Annex 3
SURFACE PREPARATION
New surfaces: - Iron: Deoxidize and degrease the surface, prime with Red Lead Anti-corrosion Primer or Blatprimer Antioxidant. After 24 hours, proceed to paint with Blatemlux.
- Galvanized iron, aluminum, and zinc: Clean and degrease the surface, apply Multipurpose Primer, Blatemprim Multi-adhesive water-based, etc., and proceed to paint with Blatemlux.
- Wood: Apply Synthetic Sealer, sand and dust off; then proceed to paint with Blatemlux. Painted surfaces: - If in good condition, sand lightly and clean with Enamel Thinner before applying Blatemlux.
- If in poor condition, remove the paint, prime, and paint with Blatemlux as if it were new.
INSTRUCTIONS FOR USE
Apply with brush, roller, or spray gun, product ready to use, do not apply on surfaces overheated by sunlight. Always apply in thin coats according to the technical characteristics. Apply the second coat respecting the recoating times.
RECOMMENDATIONS
Stir the content until the product is homogeneous. After use, close the container, trying to leave little air space if it is not to be used again for a long time.
PACKAGING
In 250 ml, 750 ml, and 4 liter containers. Colors: Snow white and colors according to sample card.
STORAGE
Storage time: 1 year in its original, tightly closed container, protected from the elements (covered and at a temperature between 5 and 35ºC).
SAFETY INFORMATION
It is essential to follow the instructions on the container label. For more information, consult the product safety data sheet.



















