
About the product
PROPERTIES
Excellent coverage, gloss, performance, brushability, and leveling, as well as good drying and high resistance to impacts, scuffs, and cleaning products. Easy to apply. Excellent adhesion to tiles.
APPLICATIONS
For painting all types of ceramic surfaces. Do not use on floors or countertops. Not suitable for immersion. Can be tinted with our Industrial Tinting System.
TECHNICAL CHARACTERISTICS
Finish: Glossy colors according to the sample book. Bright white and satin. Leveling: Excellent. Adhesion: Excellent. Brushability: Excellent. Drying:
-Bright white and colors: 3 ± 1h at 25±8ºC.
-Satin white: 2.5 ± 1h at 25±8ºC.
Recoating: 18-24 hours. Viscosity:
Bright white and colors: 160 ± 20" F-4 (Ford Cup #4) at 25 ± 8ºC (ASTM D-1200).
Satin white: 160 ± 40" F-4 (Ford Cup #4) at 25 ± 8ºC (ASTM D-1200)
Density:
Bright white and colors: 1-1.15 gr/cc (UNE-EN-ISO 2811-1 and 2).
Satin white: 1.29 ± 0.1 gr/cc (UNE-EN-ISO 2811-1 and 2).
Fineness: 7.5 ± 1 HG (Hegman Grades) (UNE-EN-ISO 1524).
Coverage: 9-11 m2/L per coat. Film thickness: 65-85 wet microns (approx. 30-40 dry microns).
Hardness: Good. Stability in container: One year in original sealed container. Tools: Clean with Enamel Thinner, Cleaning Thinner, or Universal Thinner. VOC: 2004/42/II A(i)(600/500). Max. VOCs 413 g/Lt.
SURFACE PREPARATION
New surfaces: -Tiles must be free of dust, grease, and any other dirt before painting. Painted surfaces: -If in good condition, lightly sand and clean with Enamel Thinner before applying Blatemlux Azulejos.
-If in poor condition, remove the paint and paint with Blatemlux Azulejos as if it were a new surface.
HOW TO USE
Apply with brush, roller, or spray gun. Ready-to-use product. Do not apply on surfaces overheated by direct sunlight. Always apply in thin coats according to the technical specifications. Apply the second coat respecting the recoating times.
RECOMMENDATIONS
Stir the contents until the product is homogeneous. After use, close the container, trying to leave little air space, especially if it will not be used again for a long time. 10 days after painting, it can be washed with a mild detergent. Do not use abrasive products, scouring pads, or brushes. It is not advisable to use the product in areas exposed to high heat (near stovetops) as it may cause yellowing.
PRESENTATION
Available in 750 ml size. Colors: White, light blue, beige, red, turquoise blue, navy blue, warm taupe, anthracite gray, fog, and linen.
STORAGE
Maximum storage time: More than one year in its original, well-sealed container, protected from the elements (covered and at a temperature between 5 and 35ºC).
SAFETY INFORMATION
It is essential to follow the instructions on the product label. For more information, consult the product safety data sheet.



















