
About the product
DESCRIPTION
Excellent quality colorless solvent-based varnish, specially formulated with acrylic resins for the protection of exposed brickwork (without waterproofing), highlighting its natural color without yellowing, and for penetrating and fixing surfaces with difficult adhesion.
PROPERTIES
Excellent adhesion, resistance to alkalinity and atmospheric agents such as rain, solar ultraviolet radiation, SO2, SO3, CO2 gases, etc., as well as good hardness, permeability, performance, and application. Prevents efflorescence, fixes, and hardens porous surfaces in poor condition. Does not yellow.
APPLICATIONS
Due to its maximum penetration, it is used in new construction as well as to fix paint residue (after brushing) on facades with old paints, allowing good anchoring for new paint or coatings. To beautify and protect against aggressive environmental agents on surfaces such as exposed brick, natural stone, concrete, etc., both indoors and outdoors.
TECHNICAL CHARACTERISTICS
Finish: Colorless gloss. Adhesion: Excellent (on non-waterproofed substrates).
Viscosity: 15 ± 10" F-4 (Ford cup #4) at 25º ± 8ºC (ASTM D-1200).
Density: 0.90 ± 0.10 gr / cc (UNE-EN-ISO 2811-1 and 2).
Drying time: 1 hour ± 0.5 at 25ºC.
Recoat time: 4-8 hours. Coverage: 6-10 m2/liter, per coat (applied undiluted).
Hardness: Excellent. Shelf life: more than 1 year in original sealed container. Tools: Clean with our Universal Thinner. VOC: 2004/42/II A(h)(750/750) Max. VOCs 725 g/Lt.
SURFACE PREPARATION
The natural exposed surface must be non-waterproofed, clean, and dry, not only on the surface but also in depth (especially on exposed brick). On a surface with old paints, brush until only dust remains. On new cement mortar, plaster, etc. wait until fully cured (4 weeks).
INSTRUCTIONS FOR USE
Normally, apply the product as is, undiluted, in one or two coats depending on the application needs or finish. For maximum penetration, the product can be diluted up to 50% (depending on the application method) with our Chlororubber Thinner or our Universal Thinner. Apply with a brush, roller, or spray gun.
RECOMMENDATIONS
Do not apply in rainy weather, in direct sunlight, or with relative humidity above 80%.
PACKAGING
In containers of 0.750 liters, 4 liters, and 15 liters.
STORAGE
Storage time: More than 1 year in its original, well-sealed container and protected from the elements (under cover and at a temperature between 5 and 35ºC).
SAFETY INFORMATION
It is essential to follow the instructions on the container label. For more information, consult the product's safety data sheet.



















