
About the product
Thick-layer, non-asphaltic, elastic, waterproof paint, specially formulated with the most advanced technology to prevent water infiltration from the outside, with excellent weather resistance. With anti-mold effect (on the paint).
PROPERTIES
Total waterproofing, great elasticity to withstand expansion and contraction of the substrate, as well as excellent adhesion (diluted), resistance to saponification, coverage, application, and weather resistance.
APPLICATIONS
For waterproofing roofs, decks, terraces, party walls, and in general, on any outdoor surface.
"WHERE WATER INGRESS IS TO BE AVOIDED AND COLORED ANTI-DRIP PAINT CANNOT BE APPLIED".
"NOT TRAFFICABLE".
It can be applied on all types of properly prepared normal outdoor masonry surfaces.
TECHNICAL CHARACTERISTICS
- Appearance: smooth-semi-gloss.
- Adhesion: excellent (diluted).
- Dirt over time: some on the surface.
- Viscosity: 105 ± 15 U.K. (Krebs units) at 25ºC ± 10ºC and 10% water (UNE 48-076).
- Density: 1.02 ± 0.10 gr/cc (UNE-EN-ISO 2811-1).
- Coverage: 1 lt / m² (3 coats).
- Drying time: 4-8 hours thick coat.
- Recoating: 12 hours.
- Tools: clean with water.
- Storage: more than one year in its original sealed container.
-"NOT TRAFFICABLE".
-"WHEN IN CONTACT WITH WATER IT BECOMES OPALESCENT, WHEN DRYING IT BECOMES COLORLESS AND TRANSPARENT AGAIN".
- Color: colorless.
- Non-flammable. V.O.C: 2004 / 42/ II (A/i)(140/140) Max. VOCs: 30 g/l.
SURFACE PREPARATION
New: remove stains and dust, loose parts, cover cracks, etc., and check slopes to prevent water ponding. Painted:
- with distemper or lime, or with several coats of paint, remove thoroughly beforehand.
- with paint (thin coat) remove damaged or low-quality parts.
INSTRUCTIONS FOR USE
On absorbent or difficult-to-anchor surfaces, dilute the first coat with 50% potable water, applying successive cross coats of the product as is. If the substrate presents specific problems such as cracks, lack of adhesion, etc., a first coat should be applied and while still tacky, a fiberglass mesh should be placed before continuing to apply the cross coats. It is applied by brush, roller or airless spray gun. Dilution for brush and roller 0-5% and for spray gun 5-15%.
RECOMMENDATIONS
Do not paint in rainy weather or with temperatures below 5ºC.
Stir the contents of the container.
PACKAGING
In containers of 750 ml, 4 and 15 liters.
STORAGE
Storage time of more than one year in its original well-sealed container and protected from the elements (covered and at a temperature between 5 and 35ºC).
SAFETY INFORMATION
If applied by spray gun, it is advisable to wear a mask. Keep the product out of the reach of children. In case of contact with eyes, wash with plenty of clean water. For more information, consult the product safety data sheet.



















